Let’s Get Ready to Rumble: A Story of Rumble Strips


You might have heard that noise and felt a vibration while driving on a highway and thought: “What is that noise? Do I have a flat tire?” While you may be startled, what you experienced was likely a rumble strip, designed to help keep motorists travelling safely on our highways.

Rumble strips are shallow grooves milled into the centreline and the shoulder of a roadway. If your vehicle crosses over the rumble strip, you will feel and hear the vibration of the groove and know that you have crossed the line. This “gentle” reminder gets you to steer in the correct direction and stay safe.

The Ministry of Transportation and Infrastructure began using rumble strips in 1996, and since that time, has installed more than 5,000 kilometres of centreline and shoulder rumble strips throughout the province. That is a lot of grooving!

Centreline rumble strips are placed in “no passing zones” along undivided rural two- lane, three-lane or four-lane highways throughout the province. Shoulder rumble strips are placed along rural roadways, where there is adequate shoulder width. A comprehensive study conducted by UBC and ICBC found that rumble strips installed on rural two-lane highways greatly reduced severe collisions. For example, shoulder rumble strips reduced collisions where motorists went off the road to their right, by 22.5 per cent. Centre line rumble strips on undivided rural highways resulted in 29.3 per cent fewer head-on collisions and collisions where the driver went off the road to their left.

With this kind of success, the Ministry of Transportation and Infrastructure continues to install rumble strips on BC highways. Get ready to rumble!

TranBC Trivia:

Shoulder rumble strips are 0.3 metres wide and are installed on shoulders that are at least 1.5 metres wide, to ensure there’s a smooth portion of shoulder for cyclists.

Between each 15-metre set of rumble strips, there is a 3.5-metre gap to allow cyclists to smoothly leave the shoulder, if they wish.

Join the discussion

Leave a Comment